Experimental Investigation of a Domestic Solar Chimney with Variable Collector Inclination for Passive Building Ventilation
Birju R. Yagnik1, Bharat M. Ramani2
1Birju R. Yagnik, Ph.D., Research Scholar, Department of Mechanical Engineering, Gujarat Technological University, Ahmedabad (Gujarat), India.
2Dr. Bharat M. Ramani, Professor and Principal, SLTIET, Department of Mechanical Engineering, Gujarat Technological University, Ahmedabad (Gujarat), India.
Manuscript received on 06 June 2026 | First Revised Manuscript received on 16 June 2026 | Second Revised Manuscript received on 09 July 2026 | Manuscript Accepted on 15 July 2026 | Manuscript published on 30 July 2026 | PP: 1-6 | Volume-14 Issue-8, July 2026 | Retrieval Number: 100.1/ijese.D106005040826 | DOI: 10.35940/ijese.D1060.14080726
Open Access | Editorial and Publishing Policies | Cite | Zenodo | OJS | Indexing and Abstracting
© The Authors. Blue Eyes Intelligence Engineering and Sciences Publication (BEIESP). This is an open-access article under the CC-BY-NC-ND license (http://creativecommons.org/licenses/by-nc-nd/4.0/)
Abstract: Various passive means of increasing the air movement in interior spaces have received significant attention due to the continuous effort made by the building industry in decreasing the amount of energy consumed due to the conventional means of mechanical ventilation and cooling systems. Several passive ventilation systems are available; however, the solar chimney system has become an efficient alternative since it uses solar energy to produce a convection effect and hence natural ventilation. This work involves the design and analysis of a residential solar chimney under the climate of Jamnagar, Gujarat, India. For experimental development of the unit, the hexagonal solar collector is attached to the central tapered chimney. To evaluate the effect of collector orientation on the heat transfer process, inclined collector operation was performed at angles of inclination equal to 10°, 20°, and 30°, with the same geometrical characteristics. The air temperatures at the specified points were measured with calibrated K-type thermocouples. Theoretical analysis based on energy balance, buoyancy flows, and natural convection equations was also used to evaluate temperature distributions and airflow generation. Based on analytical predictions, air temperature will increase as heat is gained from the sun and collected through the collector. Under typical summer conditions, the outlet air temperature will be higher than the ambient air temperature by about 9–10°C. In the configurations tested, the inclined collector with a slope of 10° showed the highest heat gain and efficiency because it captured solar radiation more efficiently. The analysis also shows that the system can sustain natural ventilation without the use of fans. In general, the findings show that a mini solar chimney can be a viable and energy-efficient alternative for ventilating homes in areas with high amounts of solar insolation. The approach adopted, methodology used, and predictions made in this study will form the basis for future experiments, simulations, and geometry optimization to improve the efficiency of mini solar chimneys.
Keywords: Solar Chimney, Passive Ventilation, Natural Convection, Solar Air Collector, Collector Inclination, Renewable Energy, Thermal Performance, Buoyancy-Driven Airflow, Domestic Buildings, Heat Transfer.
Scope of the Article: Mechanical Engineering